How to deal with the sluggish industrial LCD screen?

In the process of using the industrial LCD screen, there will be some faults, such as the insensitive carton phenomenon, what causes this phenomenon? Let us learn how to better maintain the industrial LCD screen.

If the touch screen responds slowly to the touch surface, it may be that the touch screen system is old, the internal clock frequency is too low, or it cannot move due to water droplets on the touch screen surface.

In general, this is common for multi-touch screens, but care should be taken to maintain them. In the detailed operation and use, we must also pay attention to the following supplementary 9 points that are not taken seriously:

1. TP is a glass product, please put it away gently to avoid breakage.

2. The contact surface of tp is a conductive film. If the protective film is torn off, it is absolutely forbidden to press the surface of the product with nails, pencils, ballpoint pens or other sharp objects to avoid soiling and scratching the product.

3. Do not stick oil, water and other liquids on the surface of the product.

4. When there are stains on the surface of tea polyphenols, please use a absorbent cotton ball or a clean cloth to gently touch the alcohol, gently wipe the surface of the product, and do not penetrate the alcohol into the product.

5. Avoid the use and preservation of organic solvents or corrosive gases (acid gases, etc.).

6. When installing the machine, please use non-corrosive glue to fix the product. When installing the machine, please wear the product with fingertips or gloves to ensure the cleanliness of the product.

7. When it is found that the TP does not work, please check whether there is virtual welding, whether the contact of the pins is good, whether the machine is installed correctly, and whether the operating touch position is accurate. If there is no such problem, please stick the protective film back on the surface of the product to ensure that the product is returned to the manufacturer for analysis and processing.

8. After unpacking inspection, keep the original packaging sealed to prevent the product from being affected by high temperature and high humidity, which will cause watermarks on the glass surface of the product.

The above content is the problem of slow response of industrial LCD screen. Take these protective measures to protect the touch screen as much as possible, delay its service life, and avoid the phenomenon of slow response.