Three Connection Methods Of Black And White LCD Screen

1. The connection between the black and white liquid crystal display screen and the conductive tape: when using this connection method, the liquid crystal display screen and the PCB structure need to be fixed together with the conductive tape. Because the electrode pitch can be made very small, it is suitable for products with many drive paths.

2. Black and white liquid crystal display metal pin connection: fix the metal pins on the outer lead of the liquid crystal display, you can directly fix the liquid crystal display on the printed circuit board, or you can insert the liquid crystal display into the socket of the printed circuit board middle. Metal pin pitches are 2.54mm, 2.0mm and 1.8mm. Applicable glass thicknesses of 1.1mm, 0.7mm and 0.55mm

3. Black and white LCD screen hot pressing soft tape connection: use soft tape to connect LCD and PCB. Since the base plate is soft, it is easy to fix during use, and the installation thickness can be reduced.